dialight corporation ? 1501 route 34 south ? farmingdale, nj 07727 ? tel: (732) 919-3119 ? fax: (732) 751-5778 ?www.dialight.co m 2.4 x 5mm rectangular ? optopipe ? optical light pipe, 5 array 515-1029 6.35 [.251] 5.08 [.200] 10.16 [.400] 15.24 [.600] 20.32 [.800] 1.09 [.043] 1.52 [.060] 1.45 [.057] typ .41 [.016] typ 10.16 [.400] 7.59 [.299] 11.73 [.462] 3.48 [.137] 5.84 [.230] 2.54 [.100] 4.57 [.180] 4.09 [.161] 8.38 [.33] 5.08 [.200] 10.16 [.400] 4.98 [.196] typ 2.44 [.096] typ 22.61 [.890] polished front surface break-off points for ?blanking out ? positions direction of light ?1.93 .05 [.076 .002] typ; 2 plcs recommended solder pad/holes layout diffused front panel break-off points for ?blanking out ? positions direction of light front panel .003 10.16 .08 [.400 .003] dimensions in mm [inches] microled smt leds for use with 515-1029 p art no. p age # recommended 597-3xx1-2xx 1-21 597-77x1-2xx 1-23 & 1-24 alternatives 597-3xx1-5xx 1-30 597-77x1-5xx 1-31 led alternatives may not produce optimum light output solder pad/holes layout shown is for bi-color leds listed under ?recommended? category contact factory for other layouts features ? high transmissivity polycarbonate material ? ul94v-0 compliance ? esd protection (circuit isolation from front panel) ? wide viewing angle ? arrays reduce insertion costs ? secures to pcb by press-fit led data for absolute maximum ratings and other electrical and optical data on the recommended leds, refer to led data sheets. dialight optopipe ? light pipe description this optopipe ? mimics a 5-position array of 2 x 5mm leds, and functions as a through-the-panel indicator. each ele- ment has a diffused viewing surface and a shallow v-groove that permits easy customer removal of unwanted elements. the array is held in place by 2 press-fit pins located beneath the second and fourth elements. the recommended light sources are dialight's 597 series plcc-2 or plcc-4 type smt leds. the smt leds are mounted in a straight line under the rear of the part on a 5.08mm pitch. the light pipe material is water clear transmissive polycarbonate rated ul94-v0, and has a 35% oxygen index. dialight can provide custom optopipe ? solutions for your applications. operating/storage temperature ?30c to +100c note: designed for post-reflow pc board insertion.
|
